SECTION 1: Product Identification
|
|
Chemical Name:
|
Ammonium hexachloropalladate (IV), 99+%
|
Product Number:
|
131
|
CAS Registry Number:
|
19168-23-1
|
Formula:
|
(NH4)2PdCl6
|
EINECS Number:
|
242-854-9
|
Chemical Family:
|
halometallate salts
|
Synonym:
|
Ammonium hexachloropalladate, Diammonium hexachloropalladate.
|
SECTION 2: Composition and Information on Ingredients
|
||||
Ingredient
|
CAS Number
|
Percent
|
ACGIH (TWA)
|
OSHA (PEL)
|
Title Compound
|
19168-23-1
|
100
|
no data
|
no data
|
SECTION 3: First Aid Measures
|
|
Eye Exposure:
|
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need assistance in keeping their eye lids open. Get immediate medical attention.
|
Skin Exposure:
|
Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if irritation persists.
|
Inhalation:
|
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
|
Ingestion:
|
Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce vomiting only if directed by medical personnel.
|
SECTION 4: Accidental Release Measures
|
|
Spill and Leak Procedures:
|
Small spills can be mixed with vermiculite or sodium carbonate and swept up.
|
SECTION 5: Handling and Storage
|
|
Handling and Storage:
|
Store material in a tightly sealed bottle. If possible, handle material in an efficient fume hood.
|
SECTION 6: Exposure Controls and Personal Protection
|
|
Eye Protection:
|
Always wear approved safety glasses when handling a chemical substance in the laboratory.
|
Skin Protection:
|
Wear appropriate chemical resistant gloves and protective clothing.
|
Ventilation:
|
Material may form a fine dust. If possible, handle the material in an efficient fume hood.
|
Respirator:
|
If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
|
Additional Protection:
|
No additional protection required.
|
SECTION 7: Stability and Reactivity
|
|
Stability:
|
hygroscopic
|
Hazardous Polymerization:
|
no hazardous polymerization
|
Conditions to Avoid:
|
material may absorb water from the atmosphere.
|
Incompatibility:
|
oxidizing agents and active metals
|
Decomposition Products:
|
hydrogen chloride, chlorine, oxides of nitrogen, and metal or metal oxides.
|
SECTION 8: Toxicological Information
|
|
RTECS Data:
|
Administration onto the skin (rabbit); Standard Draize test: 100 mg/24H.
|
Carcinogenic Effects:
|
No data available
|
Mutagenic Effects:
|
No data available
|
Tetratogenic Effects:
|
No data available
|
SECTION 9: Ecological Information
|
|
Ecological Information:
|
No information available
|
SECTION 10: Disposal Considerations
|
|
Disposal:
|
Dispose of according to local, state and federal regulations.
|
SECTION 11: Transportation
|
|
Shipping Name (CFR):
|
Non-hazardous
|
Hazard Class (CFR):
|
NA
|
Additional Hazard Class (CFR):
|
NA
|
Packaging Group (CFR):
|
NA
|
UN ID Number (CFR):
|
NA
|
Shipping Name (IATA):
|
Non-hazardous
|
Hazard Class (IATA):
|
NA
|
Additional Hazard Class (IATA):
|
NA
|
Packaging Group (IATA):
|
NA
|
UN ID Number (IATA):
|
NA
|
SECTION 12: Regulatory Information
|
|
TSCA:
|
Listed in the TSCA inventory.
|
SARA (Title 313):
|
Title compound not listed.
|
Second Ingredient:
|
none
|
Third Ingredient:
|
none
|
SECTION 13: Other Information
|
|
Disclaimer:
|
The information herein is believed to be accurate and reliable as of the date compiled. However, Kaida Chemical Engineering Co., Ltd makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information.
|
Preparation Date:
|
1/02/2010
|
Revision Date:
|
12/14/2011
|